Weave Your Dream, Build Our Homeland Together!
Sales & Support:+86-27-82801008
Weave Your Dream, Build Our Homeland Together!
Sales & Support:+86-27-82801008
Product Details:
Payment & Shipping Terms:
|
| Features: | Waterproof, Freeze Resistant | Cement Motor: | Weight: 40kgs/bag |
|---|---|---|---|
| Anti-crack Mortar: | Weight: 40kgs/bag | Putty Powder: | Weight: 20kgs/bag |
| Usage: | Link The Wall And Prevent The Wall From Cracking | Delivery: | LCL Or FCL |
Anti-crack Installation Accessories And Tools For Wall Panel Construction
List Of Installation Accessories:
1 . Fiber Glass Mesh
2 . Anti-Crack Tape
3 . Cement Mortar
It is mixed by cement, quartz sand, polymer binder, and Vanjoin patented additive. It is mainly for connection of EPS sandwich panels.
4 . Anti-crack Mortar
It is a kind of mortar which can sustain certain deformation without cracking, made from the antimitotic agent, cement, and sand toa certain proportion, This is a new type of anti-cracking material, has added our own additives with patent, perfectly combined with our EPS composite sandwich wall panel and produce mutual acting force.
5 . PU foam(PU Foam Joint Mixture)
It is a one-component, moist-curable polyurethane foaming filling elastic sealing material, canned with polyurethane prepolymer, catalyst, and gas propellant in pressure-proof iron aerosol can.
6 . Steel Bar
7 . Putty powder
8 . PU foam cleanser
|
NAME |
COMPONENT |
USAGE |
|
Fiber Glass Mesh |
Fiber glass |
mainly used for interior and exterior walls' anti-cracking and thermal insulation; |
|
Anti-Crack Tape |
Fiber and paper |
Paste the anti-crack tape in gaps between building materials to avoid crack |
|
Steel Bar |
Steel(dia: 6mm; length 20cm) |
Tapping into the wall panels to fix the wall panels |
|
Cement Mortar |
Polyvinyl alcohol, calcium hydroxide, elatin and cellulose |
joint the wall panels |
|
Anti-crack Mortar |
Polyvinyl alcohol, calcium hydroxide, gelatin and cellulose |
preventing crack between the wal panels |
|
Putty powder |
Talcum powder and gypsum powder |
used for filling and leveling up and make the surfaces of the wall smooth |
|
PU foam |
Cellularpolyurethane |
fill the gap between the wall and doors or other things |
|
PU foam cleanser |
Fatty alcohol sulfate sodium, alkyl sulfonate and inorganic composition |
prevent dust and dirt adhere to keep clean |
Construction Procedures and Precautions of Coating Base Layer Water Resistant:
1. Base Treatment:
First, clean up dust and other adhesions on the basic layer; for the hollow place and small hole area of wall, screed smoothly by mortar; let it dry, then use detergent to clean the oil stains,
finally use water to clean it.
2. Mix Putty Powder:
According to putty powder and water ratio at 1:0.4, mix the putty powder evenly; use the electric mixer for mixing until paste and elastic. With different climate and environment,
just take this data only for reference, can adjust by site condition.
3. Fully Scraping Putty Powder:
Put the putty powder on a plate, then scrape the powder on the wall with a trowel or rubber scraper from top to bottom. Scrape once or twice, according to base layer and decoration requirements. After scraping the powder, it should smooth the powder surface overall. Every scraping, the powder should not be too thick. If need brush coating, please polish the surface after the powder dried. During polishing, wave or polishing scratch is not allowed. Remove the ash when finish polishing.
4. Precautions:
1) Storage environment should be ventilated and dry place, no damp no exposure.
2) When the putty powder painting finished, the theoretical strength data reaches to the maximum should need 28 days, if test needed, please do it after 1 week until its strength condensed.
Installation Accessories:
Contact Person: Miss. Vicky
Tel: +86-27-82801008
Mobile: +86 18986026719
Fax: +86-27-82801003
E-mail: marketing@vanjoin.com
