Product Details:
Payment & Shipping Terms:
|
Features: | Light Weight, High Safety, Recyclable, | Surface Treatment: | Full Body Tiles |
---|---|---|---|
Name: | Flexible Clay Cow Leather Soft Ceramic Tile For Exterior And Interior Wall | Material: | Mountain Flour, Soft Emulsion Flocculant, Flame-retardant, Waterproof Agent, Antioxidant, Colored Sand, Additives, Etc |
Functions: | Flexible, Intelligent And Ventilate | Color: | Customized |
Energy-saving: | Reduce 90% Energy-wasting | Certificate: | ISO14001, ISO9001 Etc. |
Fireproof: | Level A | Patent: | Over 20 Patents |
Full Body Clay Cow Leather Soft Ceramic Tile for Exterior and Interior Wall
► 1. Composition of Flexible Soft Ceramic Tile:
Core Material |
Inorganic colored mineral sand(Natural raw materials) |
|
Organic Emulsion |
|
Vanjoin coupling agent |
► 2. Specification of Flexible Soft Ceramic Tile:
• Thickness: 2.5-4mm
• Size: 300*600/600*600
► 3. Technical Details of Flexible Soft Ceramic Tile:
Name | Item | Technical Index | Test Method | ||
Side Length≤100mm |
100mm<Side Length≤300mm |
Side Length>300mm |
HG/T3747.1-2004 | ||
Length & Width |
Allowable deviation of average size for each sheet to 10 sheets |
±3.5% | ±1.0% | ±0.8% | |
Thickness |
Maximum allowable deviation of average nominal dimension |
±0.5mm | |||
Remarks | The length and width shall be based on the upper edge dimension. There's no special requirement for thickness of the products with irregular concave and convex surface,ancient black bricks, and red bricks |
► 4. Application of Flexible Soft Ceramic Tile:
1) All kinds of new and old building constructions of indoor and outdoor decoration;
2) Indoor and outdoor decoration of office buildings, hospitals, shops, restaurants, bars and other
public buildings;
3) Interior and exterior wall decoration of family homes, luxury apartments, villas etc;
4) Particularly suitable for high-rise building exterior wall insulation decoration.
► 5. Installation of Flexible Soft Ceramic Tile:
1. After basic level processing, setting line, snap the line for positioning.
2. Scrape slurry behind the product, full slurry rate above 80%, pull out jagged lines.
3. Hands moving and pressing, adjust the seam width.
4. Use plastic bag filled of sealant to fill the joints or use silicone adhesive to seal and flap the joints,
press with finger is strictly prohibited.
5. When the sealant is semi-dry, use the steel bar to pull a concave joint.
6. Some place polluted by adhesive & sealant, use batch knife to scrape.
7. Use a dry sponge to remove the ash.
8. Construction completed.
Contact Person: Miss. Vicky
Tel: +86-27-82801008
Mobile: +86 18986026719
Fax: +86-27-82801003
E-mail: marketing@vanjoin.com